Recirculating Chiller -40 +100

The C10-40 Chiller, is a versatile, robust piece of kit that is a must have for small scale operations for the
use in chilling apparatus such as rotary evaporators and keeping temperatures at a consistent level.

The C10-40 is an easy machine to operate and keep clean. The large opening at the top of the chiller
enables the user to quickly fill the machine. The stainless-steel coil that wraps around the inside of the
reservoir quickly gets the system down to the desired temperature, the coil then cools the fluid inside the
reservoir.

There is an inbuilt pump that then pushes the chilled fluid around the apparatus that the user wishes to
keep at a desired temperature, the fluid then returns in a loop back into the reservoir which is then
cooled once more ready to be pumped back around the system.

The C10-40 comes on casters, on the top of the reaction bath there is a screw in stand that enables the
user to suspend equipment in the bath.

The C10-40 Chiller comes with 3/8 barbed connectors for attaching to desired apparatus.

How to Use

The C10-40 Chiller could not be easier to use. Simply fill the Reservoir with liquid transfer fluid, ensuring
that the stainless-steel coils are completely submersed. This model holds 10ltr of fluid.
Place the magnetic stirrer in the centre of the reservoir on top of the supplied glass plate, place the lid
back on top of the reservoir.

How to Commence

Turn on magnetic stirrer
Start the circulating pump (make sure the tap is open)
Turn on the chillerCapacity Information
Temp range -40 +100
Reservoir volume 10l
Flow rate 20l/m
Lift 4-6m
Capacity 2628-748w
Temp Acc +-0.2C