Botanical Health Oils Hardware Ltd

The GL16 Fluid/Vacuum Hose Connector Bend is a specialized connector used in fluid or vacuum systems that require hose connections with a change in direction. It is used in industrial, laboratory,...

The O Ring for 24/40 Joint (Green Washer) is a type of sealing ring specifically designed to be used with 24/40 ground glass joints, commonly found in laboratory glassware and equipment. Key...

Clinical Mercury Thermometer

An infrared gun (often called an infrared thermometer or IR thermometer) is a device used to measure the temperature of an object or surface without making direct contact. It works by...

Glass thermometer adaptor 24/40 is a laboratory accessory designed to connect a thermometer to a piece of glassware, such as a reaction vessel or distillation apparatus. The "24/40" part refers...

A glass thermometer adapter 14/20 is a piece of laboratory glassware designed to allow the insertion of a thermometer into a reaction setup while maintaining a sealed system. Here’s a breakdown...

A Glass Stopper for Still Flask 24/40 is a specialized piece of laboratory equipment designed to seal a still flask (or other types of laboratory flasks) during distillation or other chemical...

A Glass Stopper for a Still Flask 14/20 is a type of stopper used to seal a still flask (distillation flask) in laboratory glassware, designed with a 14/20 ground glass joint. Key Features and...

A Glass Funnel 24/40 (100mm Dia) is a piece of laboratory glassware designed to transfer liquids or powders into containers with small openings, while also helping to filter or direct substances with...

A Silicone Washer for Thermometer Port is a flexible, durable sealing component used to create a tight and secure seal around the thermometer port on equipment or systems. Is made from high-quality...

A round bottom cork ring is designed to securely hold or stabilize glassware with a round bottom, such as round-bottom flasks or other similar vessels, during heating or other...

Cold Trap - 24/40 Bottom & Glass Holes barb Inlet/Outlet

Cold Trap - 24/40 Bottom & 24/40 Inlet/Outlet

A Cold Trap - Scientific (Glass) is a piece of laboratory glassware designed to capture and condense vapors during scientific experiments, especially those involving distillation, solvent recovery,...

Cold Trap Receiving Flask 100oml 35/20 A Cold Trap 1000mL Receiving Flask with a 35/20 joint refers to a laboratory apparatus used in distillation or condensation processes. Here's a breakdown of its...

The Cold Trap Receiving Flask 1000ml 50/40 is a piece of laboratory glassware specifically designed for use in distillation processes, particularly where a cold trap is required to capture vapors or...

Cold Trap - Dewar Cap The Dewar cap is designed to seal the Dewar flask, maintaining the low temperature inside while preventing contaminants from entering or evaporating.

A Cold Trap - Dewar Joint Cap is a piece of laboratory glassware designed to seal and protect the cold trap in systems such as distillation or filtration setups. It typically features a Dewar joint...