Hurricane S 2000 Hobby Kit

Overview

BHO Complete Extraction Kit solutions are designed to provide the user with everything they need to turn their biomass into premium essential oils. 

The Hurricane S 2000 Hobby Kit has top of the range equipment at the right price enabling the user to get the best results first time round. 

The user will be able to process between 800g-1kg depending on how fine the Biomass is milled.

Please note, capacities are an estimate based on ideal material condition. You should allow for a 20% tolerance either way, depending on your biomass preparation.

The Hurricane S 2000 extraction system is one of our more comprehensive systems and when used in combination with the Helios 1.9 Cu/Ft Vacuum Drying Oven its best in category.

Hurricane S 2000 Closed loop Extractor

The Hurricane S 2000 Closed Loop Extractor is one of the more professional mid-weight closed loop systems in our range, allowing the user to extract between 800g-1kg of biomass per run. It now comes equipped with non-kink hoses, 4” filter plates with all the relevant filters so that the user can start extracting right out of the box. 

This top of the range system will not leave you disappointed - each part of the system has been cleverly designed allowing more than enough solvent space in each part of the system for the user to make multiple passes per run. 

The solvent tank and base on this system allow for a sizable increase in biomass production by simply upgrading the material column to a larger one. The system will allow for upwards of a 2kg capacity while still being able to make 3 passes per run.

The Hurricane S 2000 comes as standard with a Nitrogen Assist Gas Inlet Valve which is a great addition to the system.

In addition to using the port for pushing nitrogen though the system, the Nitrogen Assist Valve also doubles up as a vacuum pump port, enabling the user to Vacuum out the system from the material column. This means that the user can remove the material column from the base while recovering the solvent over to the reclamation tank, saving lots of time between runs.

Once the material column has been swapped out the user can vacuum out the new material column plus the solvent lines back to the reclamation tank leaving no air in the system and creating negative pressure once again.

 This extra port at the top can also be used to bleed the system safely outside when necessary.

The Hurricane S 2000 comes with: -

• Dual sight glasses on both the base and recovery tank.
• Solvent Level indicator
• 3 x non kink hoses allowing for a dedicated Vacuum/nitrogen hose.
• Quick release coupler (for nitrogen and Vacuum port outlets)
• 316 colour coded taps
• 316 fittings, making our systems the most durable on the market
• Pressure gauges at each stage
• Filter plates and filters
• Nitrogen gas inlet valve

For more information about the Hurricane S 2000 please click here.

Solvent

The user can choose between two of the best Butane mixes on the market, Newport 400ml or Whip-It! Premium 420ml. The kit comes with more than enough solvent to fill the System so the user will not have to worry about running out.

For more information about our Solvents please click here.

Honey Slick Premium Pre-Cut Oven Sheets

The kit comes with our premium Honey Slick PTFE Pre-Cut Oven Sheets. These sheets are pre-cut and thicker than anything currently on the market making them better quality and easier for the user to whip out a sheet and start pouring, limiting waste, and increasing productivity. Traditionally, all PTFE sheets came in rolls for the user to measure out then cut. BHO Hardware have already done that part and laid them out flat so that the sheets do not spring back on you, while keeping the waste to zero.

For more info about our Honey Slick Sheets please click here.

Helios 1.9 Cu/Ft Vacuum Drying Oven

The Hurricane S 2000 Closed Loop Complete Extraction Kit comes as standard with the Helios 1.9 Cu/Ft Vacuum Drying Oven - these ovens are as good as bullet proof. Each one is tested by our in-house technicians for both Heat and Vacuum before they are dispatched. Each oven will have a green test certificate which means it has passed its heat calibration and Vacuum test. The Helios 1.9 Cu/Ft Vacuum Drying Oven is oversized for the Hurricane S 2000 Closed Loop Extractor, giving the user plenty of room with the 10 shelves provided. Each shelf can hold between 80g -150g. The shelves may hold more than this, but this makes the degassing process longer and harder. At the back of the oven there is a KF25 port to hook up to the pump that comes in this kit.

A 1-year warranty comes as standard with all Helios 1.9 Cu/Ft Vacuum Drying Ovens.

For more information about our Helios 1.9 Cu/Ft Vacuum Drying Oven please click here. 

Aitcool 8 CFM Twin stage Vacuum Pump and Mist Filter & Fittings

The Hobby Kit comes with our Aitcool VP290N - 8 CFM Twin Stage Vacuum Pump. Each pump comes with a UK plug and sufficient oil to get the user started. The pump comes with 1 year warranty and is E.C marked. The kit comes as standard with an oil mist filter which the user can attach to the exhaust helping reduce emissions. The Vacuum Below and fittings to attach the pump to the oven are provided making set up easy.

The Aitcool 8CFM Twin stage pump, doubles up as a pump for vacuuming out the Hurricane S 2000 Closed Loop Extractor. The system comes as standard with a third non kink hose and hose tail connector, this is designed to link your pump to the base of the Hurricane S 2000 Closed Loop Extractor using the hose tail connector to connect to a quick release connector found on the base. The hose also doubles up as the nitrogen import hose.

For more information about our Aitcool 8CFM Twin Stage Pump please click here. 

Cleaning and Maintenance

Keeping the inside of your kit clean is important, especially the ball valves. We advise to clean all the insides of the ball valves at the end of the days runs, this will stop the valves from sticking and becoming hard to operate. Nitrile Gloves are also provided to keep the user from burning themselves on the Iso Propanol provided for cleaning down the system and workstation.

For more information about Isopropanol please click here. 

Please note we are only able to ship butane to the UK. Butane products in orders made from elsewhere will be refunded. If you'd like further information, please give us a call.